Beltone TV Link 2 Guide de dépannage télécharger pdf (Page 12)

22 23

T-program (64DW Only)

Your hearing instrument has a built-in function, enabling in many cases an improved use of the telephone

and better hearing in churches or halls where an induction loop system is installed. In order to activate this

function, the telecoil program has to be selected (often available in program 2). In this program you will hear

no sounds from the microphone, therefore most environmental sounds will be lost. If you wish, your hear-

ing care professional can change the setting in such a way that you hear the microphone and the telecoil

simultaneously.

Note: For Hearing Instruments in the True family (Models TRUXXXX-YYY), when the telecoil program has

been selected, the wireless system will be disabled and it will not be possible to use the wireless remote

control or receive a phone call using the Phone Link.

Using the telephone

• Switch your instrument to the telecoil program.

• Hold your telephone handset behind your ear, close to the hear ing instru-

ment (2-3 cm.) and slightly tilt the receiver outwards.

Hearing through an induction loop

More and more public places, churches, theatres and cinemas, have induction loops systems. In these par-

ticular rooms, they transmit, inductively, the sound of the presenter or show. At home, radio or television can

be connected to an induction loop system. Sound quality through induction loop is often better because

noises from the environment are not transmitted.

• Switch your instrument to the telecoil program.

• Choose a good spot. Reception is not clear in all locations; it depends on the position of the induction

loop. Watch for signs or try a different seat yourself.

• After the service or show, switch your instrument back to the microphone program. You will now hear

through the microphone again.

• If the sound of your hearing instrument in the telecoil program is very soft all the time, ask your hearing

care practitioner to make an adjustment.

• Your hearing care practitioner will gladly provide you with advice regarding an induction loop system at

home. Please ask for it.

3. If the manufacturer cannot issue a statement, we recommend keeping the magnet or a telephone equip-

ped with the magnet 30 cm (12”) away from magnetically sensitive devices (e.g. pacemakers).

4. High distortion during dialing or phoning may mean that the magnet is not in the optimal position relative

to the telephone receiver. To avoid the issue, please move the magnet to another place on the telephone

receiver.

5. Only use magnets supplied by Beltone

• Listen to the dail tone and move the handset a little to ﬁnd the position that gives the best reception.

• After completing the phone call, switch your instrument back to the microphone program.

If the phone has a poor telecoil signal, use the microphone program. Do not hold the handset too tightly

against your ear since this might cause ’whistling’.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 28 29

Pas de commentaire

Beltone TV Link 2 Guide de dépannage Page 12